Futurama   Planet Express Employee Lounge
The Futurama Message Board

Design and Support by Can't get enough Futurama
Help Search Futurama chat Login Register

PEEL - The Futurama Message Board    Melllvar's Erotic Friend Fiction    Leela Sculpture.. for sale? « previous next »
Author Topic: Leela Sculpture.. for sale?  (Read 1509 times)
Pages: 1 [2] Print
bish

Starship Captain
****
« Reply #40 on: 04-15-2004 11:50 »

id buy one straight off if i had money. just a side note, would you accept british pounds, or would i need to exchange it into dollars for you?
alenacat
Starship Captain
****
« Reply #41 on: 04-15-2004 12:07 »

 
Quote
Originally posted by Young_and_Angry:
Unless you like wire,no.

[zoidy]Aww[/z] I thought they were Macaroni

One question. Did you just sit down for 10 hours when you were modelling it or over a few weeks? I usually do things 20-minutes at a time unless I'm at college. And is sculpey anything like fimo, does it need oven/kiln firing?
maddoc3d

Bending Unit
***
« Reply #42 on: 04-15-2004 19:38 »

Us currency preferably.
And it was 8 hours sculpting while watching season 1.. then another 2 hour block the next day. This next one I'm going to see if I can bang it out in 6 hours. Also Fimo is kinda like Super Sculpty to my knowledge. And you just need to use an oven for 15 minutes..
The first time I used the oven in my apartment in 2 years was like 2 weeks ago..
And yes, I'd buy bachlor chow if I could find it.

I may actually have some free time to finish one of the replica's tonight! Walking on Silicone Mold Fumes!

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Young_and_Angry

Professor
*
« Reply #43 on: 04-15-2004 19:49 »

 
Quote
Originally posted by maddoc3d:
 Walking on Silicone Mold Fumes!

Woah oh oh! I'm walking on silicone mold fumes, and don't it feel good! Hye, stop throwin stuff at me!

  roll eyes   tongue

"Does not your scrotum need kicking?"
maddoc3d

Bending Unit
***
« Reply #44 on: 04-15-2004 22:12 »

I couldn't have said/sung it any better!
.. I love that song ..
The sooner I get this office modeled, the sooner I can paint Leela! ..

.. stay the course ..

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Bay

Crustacean
*
« Reply #45 on: 04-16-2004 08:33 »

This is frighteningly exciting.
green-gesus

Bending Unit
***
« Reply #46 on: 04-17-2004 00:38 »

ooh! I like, very acurate rendering.
deathknight

Crustacean
*
« Reply #47 on: 04-19-2004 09:13 »

DOnt suppose you make blowup dolls   flirt
.......pfffftt its late.
Deadset though shes spot on. I think mabey no eyelashes but - unless you can swing it.
If you can get us one to Australia then fark yer Im in- looks like you got International appeal.
  eek   eek   eek
maddoc3d

Bending Unit
***
« Reply #48 on: 04-20-2004 01:31 »

**Update**

Well, I'm in jersey now on "vacation" but I brought all my sheeeot from my workshop. I've got one about 40% air brushed, and 3 ready to be preped and sanded. I will have one of these done tommorow, and a Fry bust is next.. then a bender.

I can ship almost anywhere, but I'm going to find out how much it'll be.

.. Pictures will be posted soon, I apologize for the delay. Work kinda kicked into overdrive.

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Bay

Crustacean
*
« Reply #49 on: 04-20-2004 04:34 »

Do you have a more definite idea of price yet?  I may have to save for a while. You must consider the jobless!
DavidCohens1fan

Delivery Boy
**
« Reply #50 on: 04-20-2004 04:37 »

maddoc3d- At first I was going to do one of those "Why I never!! How dare you!", but actually, your work is great, your prices are great, and you offer this to the fans.

Great work!
tom123

Starship Captain
****
« Reply #51 on: 04-20-2004 07:41 »

That is an extremely good sculpture. I would consider buying a Bender or Fry one if you make them.
maddoc3d

Bending Unit
***
« Reply #52 on: 04-21-2004 15:58 »

.. Painting.. taking for #*@%ing ever.. The name plate has been "fun", just a little more work on it.. and I will have the first one DONE! yeah all this time for one.. and it's going to sell for $29 USD + shipping.. Even though each one is custom made.. etc.
At which time I'll start taking orders for em.

Again, I apologize for the delay. BACK TO WORK FOR ME!

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Bay

Crustacean
*
« Reply #53 on: 04-21-2004 17:27 »

Aww damn. Can you make a economy version? Battered box..unpainted...few cracks for good measure
maddoc3d

Bending Unit
***
« Reply #54 on: 04-21-2004 17:40 »
« Last Edit on: 05-17-2004 00:00 »

Here is a visual update: It still has flaws and needs some touch ups here and there.



.. a cheap one? .. why would you want to have one of them? I understand finacial difficulties, but the original cast's are quite crude (as it was my first mold). If someone wanted to buy an unpainted but cleaned one I'd have to see.

I will post one where it is DONE tonight.. this thing is taking forever..

* Finally.. I'm walking on sunshine.. woah oh!

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
tom123

Starship Captain
****
« Reply #55 on: 04-21-2004 18:18 »

THAT ONE RULES!
Bofr@

Bending Unit
***
« Reply #56 on: 04-21-2004 18:31 »

YAY,
that really looks awesome.
Could you please make some pictures of her head from other angels?

tanks
Alliteration

Starship Captain
****
« Reply #57 on: 04-21-2004 19:02 »

That looks awesome! You got some serious talent!
Shadowstar

Liquid Emperor
**
« Reply #58 on: 04-21-2004 19:59 »

Sweet llamas from the Bahamas! That f-ing rules! I'd buy it if I had some money.
maddoc3d

Bending Unit
***
« Reply #59 on: 04-21-2004 22:00 »
« Last Edit on: 05-17-2004 00:00 »

As per requested, Here are some thumbnails of other views of the Leela Sculpture. (click on the thumbs for bigger views)






I'm going to be taking pre-orders at the sale price of $29.00 + shipping (USD cash/money order) as a Marketing Test. This is a limited time deal, per sculpture batch (4 per batch). You can email me your name, address and contact information so that I can get a shipping price for you.

Thank you everyone for your patience! One if finally done! I am still working the price for an unfinished Leela sculpture. Also I am taking suggestions for my next sculpture. Should it be Fry or Bender next?

Again, if you would like to purchase a sculpture please email me with your name, address, contact information so I can get you a final total. My email is also on my site  www.maddoc3d.com

- Brandon Dicks.

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
switch

Bending Unit
***
« Reply #60 on: 04-21-2004 22:42 »

where will you be able to send them too??
because i am in australia and someother people were saying they lived in europe
maddoc3d

Bending Unit
***
« Reply #61 on: 04-21-2004 22:56 »

I can pretty much ship anywhere, but you'll have to pay for the shipping costs.

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
winna

Avatar Czar
DOOP Ubersecretary
**
« Reply #62 on: 04-21-2004 23:08 »

That is teh awsome...
Philp_J_Fry

Starship Captain
****
« Reply #63 on: 04-21-2004 23:49 »

awesome sculpture   smile
newhook_1

Urban Legend
***
« Reply #64 on: 04-22-2004 00:43 »
« Last Edit on: 04-22-2004 00:43 »

Looks awesome. I don't particually want to buy a Leela one, but let me know when you get Bender finished, and I'll probably buy one.
switch

Bending Unit
***
« Reply #65 on: 04-22-2004 11:19 »

yeah i would rather a non-leela one aswell
Zeep

Liquid Emperor
**
« Reply #66 on: 04-22-2004 11:32 »
« Last Edit on: 04-26-2004 00:00 »

if you make bender and fry as well, i'd love to buy all three in a box set! (for a reduced price of course...  flirt  smile
maddoc3d

Bending Unit
***
« Reply #67 on: 04-26-2004 18:40 »

.. dang ..
Well I've got 4 Leela sculptures STILL if anyone would like to buy them.

And I'll begin a Bender (seems like you [fans] like him more than fry) as soon as I get back to Florida. I'll start a new post when I get some concepts scanned.

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Nasty Pasty

DOOP Secretary
*
« Reply #68 on: 04-26-2004 21:51 »

i'd love you to make a fry one. That'd be kik ass.
Spacedal11

Space Pope
****
« Reply #69 on: 04-27-2004 01:18 »

and Bender! You could do one of his head and a seperate one of his shiney metal ass!
Nasty Pasty

DOOP Secretary
*
« Reply #70 on: 04-27-2004 13:23 »

 
Quote
Originally posted by Spacedal11:
and Bender! You could do one of his head and a seperate one of his shiney metal ass!

It dont look that shiny...

Spacedal11

Space Pope
****
« Reply #71 on: 04-27-2004 18:06 »

You'd aughta know...

 laff nah just kidding!
winna

Avatar Czar
DOOP Ubersecretary
**
« Reply #72 on: 04-28-2004 05:54 »

Now that you have the casts, are you gonna to be making them for awhile..?  Like on an ask first and pay basis; I could see scrounging up some money for these sculptures, they are cool.  big grin
maddoc3d

Bending Unit
***
« Reply #73 on: 04-28-2004 11:49 »

Yeah, I'll be keeping the molds for them in a safe place. And I have like 2 left over still, I think.

But don't wait too long to place an order, as some time during early May (I don't know when, but when I do I'll give you ample time to berate me), the prices are going to go to $55 based on the bunch I've sold (at that price). You guys/gals are the only ones getting the sale price, because ... well I told you I was, and you seemed enthusiastic about the sculpts when I started them.

Also, I've begun the process for Bender, and guestimate that it'll be done around.. Friday/Sat..

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Sal

Starship Captain
****
« Reply #74 on: 04-28-2004 12:09 »

Kool! Im very interested!

wen youv finished the main cast how aboy doin some of matt g and david c as a heaeds in a jar?
Sal

Starship Captain
****
« Reply #75 on: 04-28-2004 12:17 »

Sorry About the double post but this deserves itm, just looking at www.maddoc3d.com  and it kicks ass not just the futurama stuff all of it! its fucking brilliant, i love it!
Mr.Baka

Crustacean
*
« Reply #76 on: 04-28-2004 22:17 »

if you made one of Scruffy I'd buy it
maddoc3d

Bending Unit
***
« Reply #77 on: 04-28-2004 22:53 »
« Last Edit on: 04-29-2004 00:00 »

**sobering up before you post lets you make less of an ass of oneself**

Sal, youz couldntz beez mores onz the .. fuch that.. .. more on the ball. 

Also thank you for the kind words about my website. I'm in the process of making a complete facelift, as well as a huge update! .. I'm so behind its sad..

*I've been toying with the idea of doing some "Heads in a Jar". The plexiglass would be real, and I already know how to create fake transparent like water. It's also ironic, because as I getting off the airplane, my friend made mention of some stuff I should do, and he mentioned that I should make one of him (Matt G), and send one to him.. Maybe he'd like it and sign it.. or just throw it away..

*Either way I hope FOX doesn't kill me... If they weren't allready making plans to.

And as for the Scruffy Head sculpt.. well first I gotta sell some more and make a Bender. I could do a custom Scruffy for you, but it would fall in the $55 + shipping bracket. But then again it is a custom sculpture, for you.

Sorry that was the Red Lobster and Beer talking. I swear. Cheese It!

I have a list of like 30 characters I want to make.. I need ANOTHER DAY IN THE WEEK!

.. I didn't ask you for a completely reasonable excuse, I asked you to get busy..
Pages: 1 [2] Print 
« previous next »
Jump to:  

Powered by SMF | SMF © 2006, Simple Machines | some icons from famfamfam
Legal Notice & Disclaimer: "Futurama" TM and copyright FOX, its related entities and the Curiosity Company. All rights reserved. Any reproduction, duplication or distribution of these materials in any form is expressly prohibited. As a fan site, this Futurama forum, its operators, and any content on the site relating to "Futurama" are not explicitely authorized by Fox or the Curiosity Company.
Page created in 0.13 seconds with 17 queries.