The Avatar Shop 2.0

[Reply #280 on:]

Oh, ok well then. Save it, in case it gets lost somehow on my webpage. (I hope it doesn't)

@jerkberg: Yep, these tutorial Y_L_B found are ideal to learn it! Also if you later intent to make bigger scans, than just 64x64 pixels, you should take a look at bezier curves (it's for PSP7, 6 works nearly the same way) as well.

A nice edit of ooy's xmas avatar btw. 

[Reply #281 on:]

ooy's old xmas avatar.

and i made this, wanna fix it up GFF?

It's Halloween Bonus Stage Ooy:

[Reply #282 on:]

Good job ooy! There wasn't much touching-up work needed.

I blured the beer a bit more and made it transparent, that's all:



edit.. : wait a mom.. my webspace craps out    There we go 

[Reply #283 on:]

Gif, could you avatarize Roberto's head in this for me?

[Reply #284 on:]

I already did   

it's my pool avy no. 173. :


until now not uploaded though   

[Reply #285 on:]

Thankies, but don't let it fall into the pool! I want to be special! 
You know, the first time I got a custom avatar that was the one I wanted. Margy made me this, which I used for about six months:

[Reply #286 on:]

i can't colour a san because when i have antailas on i can't colour in the whole image it leaves whitish lines how can i stop this

[Reply #287 on:]

That's the problem with Antialising, the workaround is to scan the picture in a much bigger size (at least twice as big) with antialising dactivated.
Then color it and resize it down when you're ready. The resizing will blurr it a little bit to make the lines look smooth.

[Reply #288 on:]

Alternatively, you could leave anti-aliasing on, create a layer underneath the layer with the trace (we'll call it "Color" ), select an area of the trace using the Magic Wand tool, then click Selection>Modify>Expand (I like expanding it about 2-3 pixels) and fill on the Color layer. I think that will work on PSP6. But the way GFF suggested is far easier, that's how I do it. Just giving you another option... 

[Reply #289 on:]

Can someone give me an Avatar like this?

[Reply #290 on:]

The lines came out pretty thin...

[Reply #291 on:]

Nice Kyle 

I tried to scan it as well, but it is hard to grab the lines when the original is that small.

[Reply #292 on:]

I like the last one germanfryfan made. Thank you both of you.   

[Reply #293 on:]

the scan art version

if it comes up in a bad way then just click the resizing button
and an avator to go with it because i kinda spammed this thread by talking about scans so here's one of both and by the way, i used german fry fan's way but maybe i'll try yours next time kyle
thank you, i'm going to add this to the pool and custom for me

i can know try and avatorise a picture or scan a picture for someone

[Reply #294 on:]

Wow... looking realy good! Smooth lines and all. (A bit thin in my opinion though  ) I guess for the way Kyle mentioned you should use a bit thicker lines.

Again, fabulous work!

[Reply #295 on:]

size 1 lines is what i used and thank you i'll make some more avators for every scan i do
what size of lines do you use?

[Reply #296 on:]

I try to get lines of about 2 pixels when the scan is finished.

So when scanning in about 3200x2400 pixels I use lines of about 7-8 pixels thickness.

But again, that is just personal preference, try out what fits your eyes best. 

[Reply #297 on:]

can you please post a link to the new transparent scans section on PEEL please because i can't find it
can you avatorize this for the pool please

[Reply #298 on:]

Trying to get custom avatar of Caboose (from RvB) but I'm not that of a wiz in Photoshop like you guys...

Here is what I've done so far with my limited capabilities:



I managed to take a very blunt form of caboose out of the surrounding and removed the crooshair on him.

This is the original piccy. I'd also like maybe if it is possible (not too small) to put "Caboose" (just like it is written in the following pic) to distinct it from.. well, any other Halo deathmatch person-thingy...

[Reply #299 on:]

Can someone make this into a Avatar for me?

[Reply #300 on:]

How's this, Idan?

I don't think avatars are allowed to have words though.

Edit:

[Reply #301 on:]

GFF, sorry to bother you again but I want to remind you to put back my dancing avatar I asked you to make a while back, please. 

[Reply #302 on:]

@jerkberg: here you have the link Episode V: General Fan Art Strikes Back

and your avatar :


@Idan: something along this one?


@Sqeaky : I'll see what I can do     

edit: Great job Kyle.. once again I was too slow. And Technically you're correct with the words. Though isn't this just for names? 

Will be done mint   

[Reply #303 on:]

If that's the case...


And nice work with jerkberg's avatar! 

[Reply #304 on:]

Could someone make an avatar if this please?



No guarantees I'll use it, but I want to see it.

[Reply #305 on:]

like this, or a close up?

[Reply #306 on:]

Hmmm...that looks pretty sweet, but I'd need to see a close-up too...just to be safe...

[Reply #307 on:]

ok.. my last work for today:



5:22 am... I'm gonna lay down.

[Reply #308 on:]

 

Originally posted by germanfryfan:
[slurms]I'm gonna go lay down.[/slurms]

Fixed.  Anyway, thanks, I'm gonna see if it works for me.

[Reply #309 on:]

 http://www.futurama-madhouse.com.ar/fanart/zed/zed18.jpg 

I guess I'd like it reversed and that's it. Thanks.

[Reply #310 on:]

GFF, Kyle_M, thanks for the superb icons... I do hope they let words in, since Kyle_M's latest work is EXACTLY what I hoped for.

[Reply #311 on:]

 

Originally posted by Spacedal11:
 http://www.futurama-madhouse.com.ar/fanart/zed/zed18.jpg 

I guess I'd like it reversed and that's it. Thanks.

I hate jpgs, they screw up my scripts, and make me do things myself.
This is the best i could do, Mr. FryFan will probably do a better job.

[Reply #312 on:]

Test.

[Reply #313 on:]

Not realy Rage   



btw. : What does your script exactly do?

edit: And Spacedal11... ever heard of the little word "please"?    Also have you asked Zed for his permission to use it? You'd better do, I guess.   

[Reply #314 on:]

I've got scripts for everything, i've got one for avatar making; take a square picture, make a solid background colour, and it'll do the rest.
By the way; use the erode tool, it's really quite handy for thin lined scans.

I had a script that did scans too, but it was pretty sketchy, it was one of the first ones i made. Accidentally lost it in a format.
They're easy to make and well worth the effort to learn. Only available in PSP8+ though.

[Reply #315 on:]

 

Originally posted by germanfryfan:



edit: And Spacedal11... ever heard of the little word "please"?   

I said thanks. Or do you want me to do this?
 

Originally posted by Spacedal11:I-please-guess-please-I'd-please-like-please-it-please-reversed-please-and-please-that's-please-it.-please-Thanks.

Please.   

[Reply #316 on:]

the avator was just for the pool but thanks anyway, i made some of my own avators
see the oh i have poison avy thread

[Reply #317 on:]

Can someone please make an avatar of this for me? Thanks.

[Reply #318 on:]

Ahhh, a nice easy one.
You can either have the one that's always white in the middle (The second one), or the one that varies between PEEL grey and white depending on the background, (The first one) like Global Worming.

[Reply #319 on:]

Alright...

To whom it may concern:

Take this image, fix the background, and give Professy a Kaiser helmet (a.k.a Pickelhauben). Then I'll love you forever.